For health reasons, we have to give up our dream.

The base vehicle is a day registration built in 2016. It was ordered as the basis for an expedition vehicle and has all the equipment you need for a long-term trip.

The construction was carried out in 2018 - 2019 by the company Orangework according to our plans.

There is an article from Explorer magazine that features the vehicle. There is also a video.

For more photos and a room tour, visit facebook.com/twogermans

If you are interested, please send an email to bjorn@rettig.com


MAN TGM 13.290 all-wheel drive

Length 8.40 m
Width 2.43 m
Height 3.72 m
Curb weight 10800 kg
Total weight 13000 kg
L cab
Wheelbase 4250mm
Engine power 290 HP / KW Euro 5
Tires Michelin XZL 395/85 R 20
Automatic transmission TipMatic
permanent all-wheel drive
Differential locks in the front and rear axles
Front axle leaf suspension
Rear axle with air suspension
2 fuel tanks with a total of 600 liters of diesel
tire pressure control system
roof rack
5 additional headlights
2 compressed air horns
2 air-suspended driver's comfort seats
Construction

External dimensions:

Length 5500mm, width 2430mm, height 2350mm
Inside dimensions:
Length 5380 mm, width 2310 mm, height 2060 m

Three-point bearing with three pendulums and one main bearing for a stress-free connection between the body and the chassis frame
GRP sandwich element with a wall thickness of 60 mm, PET foam core
Fabric-reinforced top layer, outside 3 mm, inside 3 mm
Bonding without thermal bridges with GRP step and angle profiles
Steel frame laminated in the base plate
Deep-drawn entrance with internal steps
Climbing into the driver's cab via a bellows
Doors and flaps with a solid three-point locking system, all locks with the same key
Windows with double glazing (KCT) with integrated mosquito protection and blackout
Roof hatches KCT with insulating glazing with integrated mosquito protection and blackout
3-step staircase, electrically extendable
Extendable roof 1800 x 2300 mm, drive via four electrical linear motors

Interior design

Furniture made of multilayer panels with a laminate (HPL) surface
Furniture fronts in white matt and with real oak wood veneer
Edges edged with solid wood
Furniture fittings made of stainless steel or nickel-plated brass, adjustable in three dimensions
Stainless steel compression latches
vinyl flooring

Beds:
Lift double bed 2100 x1800 mm, ventilated, electrically movable, can also be folded up into the open roof

Seating group:
U-shaped seating group convertible to a bed 2000 x 2000 mm
height-adjustable table frame

Kitchen:
Corian worktop with flush sink
Miele induction hob with 2 burners
Fridge capacity 180 liters
Freezer capacity 75 liters
Miele microwave oven combination
Base cabinets with drawers, ball-bearing with self-closing
washing machine

Washroom:
Collapsible washbasin made of Corian
Mirror wall cabinets
Corian shower tray
Separating toilet with separate 25l urine tank

Storage spaces:
All-round upper cabinets with height-adjustable shelves
Wardrobe on the side of the rear bed with height-adjustable shelves
Cloakroom with shoe cabinet

Technical Equipment:

Power supply:
Control panel for monitoring the power supply and the individual fill levels
Protection of the individual circuits via thermal circuit breakers with LED display
Mastervolt bus system
Independent power supply for the body with three lithium-ion batteries
Battery capacity 24V / 600Ah
Inverter / charger combi sinusoidal power 7000 W / 230 V, charging power 120 A / 24 V
Charger for input voltage 95 -235 V, charging capacity 60 A
Auxiliary alternator with high-performance regulator, charging capacity 130 A
Solar modules, power 1.0 Kw
Voltage converter 24V / 12V. Power 480W

water supply:
450 liters of fresh water
24 liter hot water boiler
130 liter waste water tank
Sensor water pump
2-stage water filter
Household fittings
outdoor shower
All water installations are laid frost-proof in the interior

Heating:
5 KW diesel hot water
individual heating circuits can be controlled via a central thermostat
Convectors invisible in the seating area
Heated towel rail in the bathroom
underfloor heating
Additional heating 2000W
Use of engine waste heat to heat the box body

Miscellaneous
Roof rack with spare wheel holder, lifting and lowering using a separate crane arm
Motorcycle bridge at the rear, hydraulic lifting and lowering of the motorcycle platform
Air conditioning with 3.4 KW cooling capacity
Camera system, with two cameras HD resolution

Private sale, information without claim to completeness and without guarantee, errors and prior sale reserved.